Estes Park

The airplane was maneuvering to deliver fire retardant when its left wing separated. Aircraft control was lost and the airplane crashed into mountainous terrain. A witness on the ground took a series of photographs that showed the air tanker's left wing separating at the wing root and the remaining airplane entering a 45-degree dive to the ground in a counterclockwise roll. An examination of the airplane wreckage revealed extensive areas of preexisting fatigue in the left wing's forward spar lower spar cap, the adjacent spar web, and the adjacent area of the lower wing skin. The portion of the wing containing the fatigue crack was obscured by the retardant tanks and would not have been detectable by an exterior visual inspection. An examination of two other air tankers of the same make and model revealed the area where the failure occurred on the accident airplane was in a location masked by the airplane's fuselage construction. The airplane was manufactured in 1945 and was in military service until 1956. It was not designed with the intention of operating as a firefighting airplane. In 1958, the airplane was converted to civilian use as an airtanker and served in that capacity until the time of the accident. The investigation revealed that the owner developed service and inspection procedures for the airtanker; however, the information contained in the procedures did not adequately describe where and how to inspect for critical fatigue cracks. The procedures were based on U.S Navy PB4Y-2 airplane structural repair manuals that had not been revised since 1948.

While on a cross-country flight, according to radar data and weather information, the pilot descended below terrain clearance altitude and entered IMC conditions. The aircraft impacted a mountain peak approximately 100 feet below the summit. No flight plan had been filed and the pilot was not instrument rated.